top of page

Our products have moved!

We have recently moved our product range to our new shop website www.dakro-shop.com.

Our products will only be available on our new site.

Clack’s automatic valve is a state of the art control head designed for residential and commercial applications requiring flow rates of up to 6.1m3/hr (1”) 7.7m3/hr (1.25”). It has the capability of servicing up to 21” diameter tanks. The valve acts as a primary center that directs and regulates all cycles of water softening or filtration. It can be set to perform regeneration or simple backwash and rinse. The valve comes in different program versions and is controlled by a solid state microprocessor with front panel setting and screen display..

Valve Specifications 1"

  • Service Flow Rate @ 1 bar drop: 6.1m³/hr
  • Backwash Flow Rate @ 1.7 bar drop: 6.1m³/hr
  • Operating Pressure: 1.5 to 8.5 bar
  • Water Temperature: 4°C to 43°C
  • Tank Thread: 2.5 inch
  • In/Out: 1 inch BSP
  • Brine Line: 3/8 inch
  • Riser Tube Diameter: 1.05 inch

Valve Specifications 1.25"

  • Service Flow Rate @ 1 bar drop: 7.7m³/hr
  • Backwash Flow Rate @ 1.7 bar drop: 7.3m³/hr
  • Operating Pressure: 1.5 to 8.5 bar
  • Water Temperature: 4°C to 43°C
  • Tank Thread: 2.5 inch
  • In/Out: 1 inch BSP
  • Brine Line: 3/8 inch
  • Riser Tube Diameter: 32mm

Picture: Clack TC Valve

Advantages

  • More informative 4 digit LCD Display with Status Indicators
  • Solid state microprocessor with easy access front panel settings
  • Backwash and brining ability to 21” diameter tanks
  • Three modes to initiate regeneration: time clock delayed, Pressure Differential delayed, Pressure Differential Immediate
  • Front panel display for time of day, days until next regeneration
  • Days between regeneration feature: 1–99 days standard; 7-day optional
  • Double backwash feature offers optimum regeneration, cleaning ability and efficiency
  • 10 selectable pre-programmed regeneration cycles
  • Coin Cell Lithium battery back-up with a 8 hour carry over
  • Auto detection of 50/60 Hz line frequency, with automatic 12/24 hour time keeping formats
  • Level VI 15-volt output DC power supply provides safe and easy installation
  • Post treated water regenerant refill
  • Reliable and proven DC drive

Picture: Clack CI Valve

Advantages

  • Solid state microprocessor with easy access front panel settings
  • Four methods to initiate regeneration; meter immediate, meter delayed, time clock delayed or pressure differential
  • Program in ppm, French degrees, German degrees, or cubic meters
  • Fully programmable regeneration cycle sequence (maximum 9)
  • Programmable regeneration cycle times
  • Days override feature; 1 – 28 days available
  • Backwash and brining ability to 21" diameter tanks
  • Downflow/upflow regeneration
  • Stores system configuration and operation data in nonvolatile memory
  • Coin Cell Lithium battery back-up with a 24 hour carry over
  • Level VI 15-volt output DC power supply provides safe and easy installation
  • Control valve design provides optimum service and backwash rates
  • Pre or Post treated water regenerant refill
  • Mixing valve option available
  • Low salt alarm
  • 24-hour clock
  • Reliable and proven DC drive
  • 2 free programmable relay contacts

Clack WS1.25 Valves

PriceFrom £293.56
Excluding VAT

    Related Products

    bottom of page